Identification Plate (P/N: 451830xx)
Information pertaining to the mast can be found on the Identification Plates (Figure 1-13):
•
On the Mast Drive Housing (P/N: 4518302)
•
On the side of the Universal Control Box (P/N: 4518301)
The information on the Identification Plates is the same.
Crank Handle Assembly (P/N: A3209918)
The Crank Handle Assembly (Figure 1-14) can be used to manually crank the Motor to extend
and retract the mast.
When manually cranking the Motor, it is necessary to remove all power from the Mast System.
TP-5418901-F
August 2020
Figure 1-13 Identification Plate (P/N: 4518302 Shown)
Figure 1-14 Crank Handle Assembly
Original Instructions
S
AL O
TILETTO
PERATING
I
NSTRUCTIONS
1-19