Table of Contents
Advertisement
GB ©Bostitch. Not to be reproduced without permission. Unauthorised copies of this document do
EngLIsh
not constitute CE compliance for the products.
f ) Keep cutting tools sharp and clean. Properly
maintained cutting tools with sharp cutting edges are less
FR ©BOSTITCH. Reproduction interdite sans permission préalable. Les copies non autorisées de
likely to bind and are easier to control.
ce document ne signifient en rien que les produits soient conformes aux normes CE.
g ) Use the power tool, accessories and tool bits etc.,
in accordance with these instructions taking into
DE ©BOSTITCH. Vervielfältigung nicht ohne Genehmigung gestattet. Unzulässig erstellte Kopien
account the working conditions and the work to be
dieses Dokuments erfüllen nicht die CE-Richtlinien für Produkte.
performed. Use of the power tool for operations different
from those intended could result in a hazardous situation.
NL ©BOSTITCH. Mag niet worden vermenigvuldigd zonder toestemming. Onrechtmatige kopieën
5) Battery tool use and care
van dit document willen niet zeggen dat de producten voldoen aan de CE-vereisten.
a ) Recharge only with the charger specified by the
manufacturer. A charger that is suitable for one type
of battery pack may create a risk of fire when used with
DK ©BOSTITCH. Må ikke gengives uden tilladelse. Uautoriserede kopier af dette dokument udgør
another battery pack.
ikke CE overholdelse for produkterne.
b ) Use power tools only with specifically designated
battery packs. Use of any other battery packs may create
FI ©BOSTITCH. Ei saa jäljentää ilman lupaa. Tämän asiakirjan ilman valtuutusta tehdyt kopiot
a risk of injury and fire.
eivät muodosta tuotteille CE-yhdenmukaisuutta.
c ) When battery pack is not in use, keep it away from
other metal objects like paper clips, coins, keys,
GR ©BOSTITCH. Απαγορεύεται η αναπαραγωγή χωρίς προηγούμενη άδεια. Τα μη
nails, screws or other small metal objects that can
make a connection from one terminal to another.
εξουσιοδοτημένα αντίγραφα του παρόντος εγγράφου δεν αποτελούν συμμόρφωση CE για
Shorting the battery terminals together may cause burns
τα προϊόντα.
or a fire.
d ) Under abusive conditions, liquid may be ejected
IT ©BOSTITCH. Vietata la riproduzione senza permesso. Le copie non autorizzate di questo
from the battery; avoid contact. If contact
documento non garantiscono la conformità CE per i relativi prodotti.
accidentally occurs, flush with water. If liquid
contacts eyes, additionally seek medical help. Liquid
NO ©BOSTITCH. Skal ikke reproduseres uten tillatelse. Ikke godkjente kopier av dette
ejected from the battery may cause irritation or burns.
dokumentet oppfyller ikke kravene for CE-merking for produktet.
6) Service
a ) Have your power tool serviced by a qualified repair
PT ©BOSTITCH. Reprodução proibida sem autorização prévia. As cópias não autorizadas deste
person using only identical replacement parts. This
will ensure that the safety of the power tool is maintained.
documento não estão em conformidade com a CE para os produtos.
Safety Rules for Finish Nailer
ES ©BOSTITCH. Prohibida la reproducción sin permiso. Las copias no autorizadas de este
•
Always assume that the tool contains fasteners. Careless
documento no suponen la conformidad con las normas CE de los productos.
handling of the nailer can result in unexpected firing of
fasteners and personal injury.
SE ©BOSTITCH. Prohibida la reproducción sin permiso. Las copias no autorizadas de este
•
Do not point the tool towards yourself or anyone
nearby. Unexpected triggering will discharge a fastener
documento no suponen la conformidad con las normas CE de los productos.
causing an injury.
•
Do not actuate the tool unless the tool is placed firmly
PL ©BOSTITCH. Niniejszy dokument nie może być kopiowany bez pozwolenia.
against the workpiece. If the tool is not in contact with
Nieautoryzowane kopie niniejszego dokumentu nie stanowią deklaracji zgodności CE
the workpiece, the fastener may be deflected away from
prezentowanych produktów.
your target.
•
Disconnect the tool from the power source when the
CZ ©BOSTITCH. Niniejszy dokument nie może być kopiowany bez pozwolenia.
fastener jams in the tool. While removing a jammed
Nieautoryzowane kopie niniejszego dokumentu nie stanowią deklaracji zgodności CE
fastener, the nailer may be accidentally activated if it is
plugged in.
prezentowanych produktów.
Do not use this nailer for fastening electrical cables. It is
•
not designed for electric cable installation and may damage
SK ©BOSTITCH. Rozmnožovanie bez povolenia je zakázané. Neoprávnené kópie tohto
the insulation of electric cables thereby causing electric shock
dokumentu nie sú v súlade s CE pre dané výrobky.
or fire hazards.
Use caution while removing a jammed fastener. The
•
HU ©BOSTITCH. A dokumentum engedély nélkül nem sokszorosítható. Az engedély nélkül
mechanism may be under compression and the fastener
sokszorosított dokumentum nem jelenti a termék CE-megfelelőségét.
may be forcefully discharged while attempting to free a
jammed condition.
28
•
Hold tool by insulated gripping surfaces when
performing an operation where driven fasteners may
contact hidden wiring. Contact with a "live" wire will make
exposed metal parts of the tool "live" and shock the operator.
Additional Nailer Safety Warnings
•
Always wear safety glasses.
•
Always wear ear protection.
•
Only use fasteners of th e type specified in the manual.
•
Do not use any stands for mounting the tool
to a support.
Do not disassemble or block any parts of the fastener
•
driving tool such as the contact trip.
•
Prior to each operation check that the safety
and triggering mechanism is functioning properly and
that all nuts and bolts are tight.
•
Do not use the tool as a hammer.
Do not use the BTCN120
•
ʵ when changing from one driving location to another
involving the use of scaffoldings, stairs, ladders or ladder-
like constructions, e.g., roof laths, etc.;
ʵ when closing boxes or crates;
ʵ when fitting transportation safety systems, e.g., on
vehicles, wagons, etc.
For exemptions check your local national
workplace regulations.
•
Always check local workplace regulations.
•
Never point any operational fastener driving tool at
yourself or at any other person.
•
While working, hold the tool in such a way that no
injuries can be caused to the head or to the body in
the event of a possible recoil due to a disruption in the
energy supply or hard areas within the work piece.
•
Never actuate the fastener driving tool into free space.
•
In the work area, carry the tool at the workplace using
only one handle, and never with the trigger actuated.
•
Consider the conditions in the work area Fasteners can
penetrate thin work pieces or slip off corners and edges
of the work piece, and thus put people at risk.
•
Do not drive fasteners close to the edge of the
work piece.
•
Do not drive fasteners on top of other fasteners.
Sequential/Bump Selector Switch
Sequential Action
When using the tool in sequential mode, do not
•
actuate the tool unless the tool is placed firmly against
the workpiece.
Bump Action
When using the tool in bump action, be careful of
•
unin tentional double fires resulting from tool recoil.
Unwanted fasteners may be driven if the contact trip is
allowed to accidentally re-contact the work surface.
Advertisement
Table of Contents
