Omron K7GE-MG User Manual page 81

Load (motor) CH1
Load (motor) CH2
Load (motor) CH3
PLC contact
Trigger signal
Measurement operation
Status output during
measurement
MEAS indicator
ALM 1, ALM 2 output
Alarm output indicator
ALM indicator
Main display
(2) Measurement moves from channel 1 to channel 2
The following parts operate simultaneously with the confirmation
of the measurement value for channel 1.
• The results of alarm judgment for CH1 are reflected in ALM
1/ALM 2 output
• The results of alarm judgment for CH1 are reflected in the
alarm output indicator
• The results of alarm judgment for CH1 are reflected in the
ALM indicator of the Probe Unit
• The MEAS indicator of CH1 is not lit and the MEAS
indicator of CH2 is lit
• The countdown until the measurement completes for
channel 2 is displayed on the main display part
Insulation Resistance Monitoring Device User's Manual (N224)
OFF OFF
OFF OFF
OFF OFF
ON ON
ON ON
Motor stop Motor stop
CH1 CH1
standby standby
ON ON
OFF OFF
r CH1 CH1
OFF OFF
OFF OFF
r
OFF OFF
r
---- ----
Countdown Countdown
CH1 CH1
(1) (1)
4 Functions Related to Measurement
CH2 CH3
OFF OFF
CH2 CH3
CH1 ALM 1, ALM 2 ON 1, ALM 2 ON
CH1 Lit red Lit red
CH1 +CH2 ON +CH3 +CH3
C/D C/D CH2 CH2
CH2 CH3 fail flashes fail flashes
Measurement
(2) (3) (4) (4)
failed
Motor stop Motor stop
CH1 CH1
standby standby
CH1 CH1
OFF OFF
OFF OFF
OFF OFF
Countdown Countdown
CH1 CH1
(5) (5)
MEAS MEAS MEAS
TRIG FIN
LVL
--81
2
ALM ALM ALM
CH
CH1 CH2 CH3
MANU ERR AGE
ALM 2
ALM 1
The above display example shows
a case in which no alarm occurs
for channel 1.
Alarm output indicator: Green
ALM indicator: Not lit
ALM 1 output: OFF
4 - 13
4