5 Using Setting Parameters
3.
Press the Shift Key to enter the monitoring state.
•
The setting value is displayed.
4.
Press the Shift Key again to move to the setting change state.
•
The value that can be changed starts flashing.
5.
Use the Up Key to change the setting value.
6.
Press the Mode Key to move to the next setting parameter.
•
The changed setting value is saved in the internal memory.
7.
Press the Level Key for at least 1 second to return to the
Operation Level.
•
The LVL/CH display will indicate 1, and the CH indicator will light
to show that the Operation Level has been entered.
---- indicates measurement standby.
5 - 12
Insulation Resistance Monitoring Device User's Manual (N224)
TRIG
FIN
LVL
n-c
0
MANU
ERR
AGE
TRIG
FIN
LVL
n-c
0
MANU
ERR
AGE
TRIG
FIN
LVL
n-o
0
MANU
ERR
AGE
TRIG
FIN
LVL
tr-r
0
MANU
ERR
AGE
TRIG
FIN
1 second
----
1
CH
MANU
ERR
AGE