Omron K7GE-MG User Manual page 104

5 Using Setting Parameters
5.
Press the Mode Key to move to the next setting parameter.
•
The changed setting value is saved in the internal memory.
6.
Press the Level Key for at least 1 second to return to the
Operation Level.
•
The LVL/CH display will indicate 1, and the CH indicator will light
to show that the Operation Level has been entered.
---- indicates measurement standby.
5 - 8
Insulation Resistance Monitoring Device User's Manual (N224)
TRIG FIN
LVL
alm1
0
MANU ERR AGE
TRIG FIN
1 second
----
1
CH
MANU ERR AGE