EXFO MaxTester 630G User Manual page 121

Speedtest by Ookla
The Throughput Test tab (GVXAA and GVXAB
models only) displays the Speedtest by Ookla Test
Status and the Download/Upload speed results,
along with the Ping (reaction time in ms) value to the
nearest server. Other parameters displayed are the
following:
Test Status displays a real-time condition of the

test or an error message.
Host is the URL or IP address of the nearest Ookla

server based on the lowest Ping.
Location is the city and province/state in which

the Host server resides.
Country is the country the Location is in.

Sponsor is the name of the testing Host server.

Test Type displays which test was run. Here you can switch to the

iPerf3 Speed Test, configure the parameters (except for Auto Test),
and run the test.
Ookla Server displays the server used to run the test. Automatic runs

the Ookla test with the lowest latency server. You can select a specific
Ookla server from the list and rerun the test.
Begin Test button allows you to run a new test.

If you selected Yes for the Show Privacy Statement in the Test Setup, the
following note is displayed prior to the test.
1. Ookla is a third party provider. The Ookla Speedtest Powered technology involves Ookla owned and/or controlled
servers that may or may not be within your network. Ookla retains the right to aggregate test results and to monetize
aggregated results as they see fit.
G.fast/VDSL2/ADSL2+ Multi-play Test Set
Running DSL/IP Tests and Viewing Results
1
Data Tests Summary
115