Exfo Connect; Comms Setup - EXFO MaxTester 630G User Manual

EXFO Connect

The EXFO Connect menu presents the following
2 sub-menus:
EXFO Connect Client (ECC) opens to the main

menu page which allows you to navigate between
the ECC interfaces. Please refer to the ECC User
Guide for more information.
Comms Setup allows you to configure the EXFO

Connect communications upload setup.

Comms Setup

Connection Enable
The Connection Enable tab allows you to choose the
Connection Method for upload.
Wi-Fi

Ethernet

DSL allows you to perform software downloads

and upload your results to the EXFO Connect
Server. You should run Manual DSL tests and
achieve a WAN connection before activating the
EXFO Connect application from the Upload/Save
Result screen. When DSL is selected, the
following message is displayed: DSL connection
was chosen for EXFO Connect. Please use EXFO Connect button
inside DSL Manual test Upload/Save Results page.
Disable Connection option disables uploads via Wi-Fi or the Ethernet.

G.fast/VDSL2/ADSL2+ Multi-play Test Set
Setting Up the MAX-630G
EXFO Connect
41