Remote Display
The Remote Display function allows you to connect
the MaxTester to your computer remotely, using PC
TightVNC or RealVNC client application, and a
Bluetooth or USB connection.
Enable Remote Display button starts the Remote
Display connection. Once the connection is setup
successfully and the remote display server starts,
the button changes to Stop Remote Display until
the connection is dropped.
Connect to Device allows you to select a
Bluetooth device that has been paired
successfully or a USB Connection. A connection
icon is displayed in the menu bar if the setup is successful. If you select
None, then the Enable Remote Display button is disabled.
Note: The USB Connection for Remote Display uses RNDIS protocol and the
Active Sync will not be functional when this USB connection is active.
VNC Server IP address displays one of the following server IP
addresses:
Bluetooth Pairing
G.fast/VDSL2/ADSL2+ Multi-play Test Set
for a USB Connection, 169.254.0.1
for a Bluetooth connection, 169.254.0.2
for None, N/A
Find Bluetooth Devices button searches for and lists all
discoverable Bluetooth devices. The list also displays all the device
names that were previously paired with your MaxTester, whether
or not a Bluetooth signal is currently present.
Status displays a Bluetooth symbol if the device is connected.
Setting Up the MAX-630G
Display and Language
23
Need help?
Do you have a question about the MaxTester 630G and is the answer not in the manual?
Questions and answers