EXFO MaxTester 630G User Manual page 129


Note: If EXFO Connect Client is selected, the available selections for Report
Format are only MHTML and XML.



To set parameter values and save results:
1. Press the left/right and up/down arrow keys to highlight the desired
parameter.
2. Press
3. Press the up/down arrow key to highlight the desired value.
OR
G.fast/VDSL2/ADSL2+ Multi-play Test Set
Saving, Reading, and Managing DSL/IP Test Results
Report Format is MaxTester, HTML, MHTML, or XML.
You can generate and export HTML, MHTML, or XML reports from
any saved test result.
Reports include:
Product/General Information including Pass/Fail status.
Identification
Profile/Results Summary
Blank entries for your Signature and the Date.
Report File Name allows you to preview and edit the result file
name. The proposed file name is based on current auto-naming
parameters configured in Setup/Application Settings/File Name.
Export button confirms if the Report File Name is saved
successfully. If a USB device is not inserted, the following warning
dialogue box appears: USB device not present.
EXFO Connect button is active only for Manual Test when DSL
sync is established and WAN Status is Connected. If Access Mode
is IPv6 (DHCP) or Bridged, EXFO Connect button is not available.
The button activates EXFO Connect Client (ECC) menu allowing
you to access the ECC interfaces. Please refer to the ECC User
Guide for more information.
to display the list or select the value.
Saving Results
123