EXFO MaxTester 630G User Manual page 44

Setting Up the MAX-630G
Upload Setup
The following parameters are available only when Access Mode is Static.





Restore Default button allows you to reset the entries to their defaults.

To configure the setup options:
1. Press the up/down arrows to select the desired parameter.
2. Press the left/right arrow keys to view and select the options.
OR
3. Press
editor screen and use the navigation keys to scroll through.
4. Press
38
IP Address is the address for the unit that is actively connected to
your network or the internet at the time of login.
Gateway is the IP address of the default gateway.
Subnet Mask is the network address used to identify if the IP
address is within the same wide area network.
DNS1 is the address of the primary domain name server to be used
by the unit. If DNS is unavailable, enter 0.0.0.0.
DNS2 is the address of the secondary domain name server to be
used by the unit. If DNS is unavailable, enter 0.0.0.0.
on a value to open a list box of options or the alphanumeric
to confirm the value.
MAX-630G