EXFO MaxTester 630G User Manual page 130

Saving, Reading, and Managing DSL/IP Test Results
Saving Results
4. Press the left arrow key to erase the existing value, and then use the
alphanumeric keypad to enter a value. To cancel the entry, press
5. Press
Select Result File
Select Result File page displays a list of existing file
names where you can save your results.
To save your results to an existing file name:
1. Use the up/down navigation keys to highlight the
desired FileName.
2. Press
Upload
The Upload page allows you to upload the saved
results to an FTP site or a USB memory stick. Select a
FileName or All files previously saved. Files are
uploaded via the existing in-band DSL or Ethernet
connection made during the test or an out-band
upload connection (Wi-Fi or Ethernet) as shown by
the corresponding icon in the top right-hand corner of
the navigation bar.
Upload Location is FTP or USB.

Upload Results Location allows you to upload

saved DSL/Ethernet or Copper result files. DSL
and Ethernet result files are at the same location.
Select Files is either None which removes all check marks allowing

you to select one or more files, or All.
124
to accept the value.
to confirm your selection.
.
MAX-630G