Table of Contents
Advertisement
Liquid Leakage Alarm
The liquid leakage alarm sensor should be installed at the
bottom of the instrument. Once liquid leakage is detected, the
instrument would immediately give an alarm and stop
operation to prevent accidental leakage from causing
corrosion damage to the instrument or causing safety
problems.
The liquid leakage sensor is connected to the control circuit of
the entire instrument through a connector. When the leakage
liquid level exceeds the warning position, the liquid leakage
alarm sensor would give out an alarm signal. And for the sake
of safety, the instrument would automatically stop measuring.
Only when the error is corrected and the liquid leakage sensor
recovers to be dry again can the measurement operation be
restarted. Dispose liquid and waste after wiping properly
according to local regulations.
20 |
Installation
Orion 8010cX Ammonia Analyzer
Advertisement
Table of Contents
