Installing And Connecting The Device; Mounting Instructions; Preparing For Installation; Check The Scope Of Delivery - Siemens SIMATIC INOX Series Compact Operating Instructions

Installing and connecting the device

3.1

Mounting instructions

The technical specifications given for the device are guaranteed:
● If the device is installed by qualified personnel
● If the installation is performed as specified in this document
3.2

Preparing for installation

3.2.1

Check the scope of delivery

Check the scope of delivery for visible signs of damages caused during transport and for
completeness, see chapter "Scope of delivery (Page 8)".
NOTICE
Damaged parts
A damaged part can cause device malfunctions.
Do not install damaged parts.
In the case of damaged parts or incomplete delivery, contact your Siemens representative.
3.2.2

Checking the operating conditions

Note the following aspects before installing the device:
1. Familiarize yourself with the standards, approvals, EMC parameters and technical
specifications for operation of the device. This information is available in the following
chapters:
– "Certificates and approvals (Page 26)"
– See the operating instructions for electromagnetic compatibility
2. Check the mechanical and climatic ambient conditions for operation of the device; see
Classification of environmental conditions (Page 36).
3. Follow the notes on use in the operating instructions.
Comfort Panels INOX, ITC INOX
Compact Operating Instructions, 09/2017, A5E33472156-AI
3
13