User Leds - Xilinx ZC702 User Manual

Pushbutton SW13 wired in parallel to DIP switch SW15 switch 1
°
Pushbutton SW14 wired in parallel to DIP switch SW15 switch 2
°
• PS Power-On and System Reset pushbuttons (Switches)
SW1 (PS_POR_B)
°
SW2 (PS_SRST_B)
°
• Two user GPIO male pin headers (callout 28)
• 2 x 6 0.1 inch pitch PMOD1 J63
• 1 x 6 0.1 inch pitch PMOD2 J62

User LEDs

[Figure 1-2, callout 17]
The ZC702 board supports eight user LEDs connected to XC7Z020 SoC Banks 13, 33, 34, and
35 through level-shifters. Note that the LEDs are wired in parallel with headers J63 (PMOD1)
and J62 (PMOD2). These headers are described in
ZC702 Board User Guide
UG850 (v1.7) March 27, 2019
User PMOD GPIO
www.xilinx.com
Feature Descriptions
Headers.
45
Send Feedback