Fpga U1 User Leds, Dip And Pushbutton Switches; User Dip Switches (Active High) - Xilinx ML630 User Manual

Chapter 1: ML630 Board Features and Operation

FPGA U1 User LEDs, DIP and Pushbutton Switches

Figure 1-2
DS10 through DS17 are eight active-High LEDs that are connected to user I/O pins on
FPGA U1 as shown in
purpose determined by the user.
Table 1-3: FPGA U1 User LEDs

User DIP Switches (Active High)

Figure 1-2
FPGA U1 DIP switch SW7 provides a set of eight active-High switches that are connected
to user I/O pins on the FPGA as shown in
set control bits or any other purpose determined by the user.
Table 1-4: FPGA U1 User DIP Switches
18
callout [22]
Table
FPGA U1 Pin Net Name
K33 U1_USER_LED1
L33 U1_USER_LED2
A37 U1_USER_LED3
B37 U1_USER_LED4
B36 U1_USER_LED5
B35 U1_USER_LED6
A35 U1_USER_LED7
A34 U1_USER_LED8
callout [22]
FPGA U1 Pin Net Name
J20 U1_USER_SW1
K21 U1_USER_SW2
P21 U1_USER_SW3
R21 U1_USER_SW4
G20 U1_USER_SW5
H21 U1_USER_SW6
E20 U1_USER_SW7
F20 U1_USER_SW8
www.xilinx.com
1-3. These LEDs can be used to indicate status or any other
Reference
Designator
DS17
DS16
DS15
DS14
DS13
DS12
DS11
DS10
Table 1-4. These switched signals can be used to
Reference
Designator
SW7
ML630 Board User Guide
UG828 (v1.0) September 28, 2011