Hdmi Video Output - Xilinx ZC702 User Manual

Table 1-16 lists the USB connections between the XC7Z020 SoC PS Bank 501 and the
CP2103 UART bridge.
Table 1-16: XC7Z020 SoC to CP2103 Connections
XC7Z020 SoC (U1) Bank 500
Pin Name Pin Number
PS_MIO48 D11
PS_MIO49 C14
Refer to the Silicon Labs website for technical information on the CP2103GM and the VCP
drivers [Ref 19].

HDMI Video Output

[Figure 1-2, callout 13]
The ZC702 board provides a high-definition multimedia interface (HDMI®) video output
using an Analog Devices ADV7511KSTZ-P HDMI transmitter at U40. The HDMI output is
provided on a Molex 500254-1927 HDMI type-A receptacle at P1. The ADV7511 supports
1080P 60Hz, YCbCr 4:2:2 encoding via 16-bit input data mapping.
The ZC702 board supports the following HDMI device interfaces:
• 16 data lines
• Independent VSYNC, HSYNC
• Single-ended input CLK
• Interrupt Out pin to XC7Z020 SoC
• I2C
• SPDIF
ZC702 Board User Guide
UG850 (v1.7) March 27, 2019
Function Direction
TX Data Out
RX Data In
www.xilinx.com
CP2103GM Device (U36)
Net Name
Pin
USB_UART_RX 24
USB_UART_TX 25
Feature Descriptions
Function Direction
RXD Data In
TXD Data Out
35
Send Feedback