Viconics VTR8300 Series User Interface Manual page 77

Device X
This screen is a subset of the Ecosystems screen and shows data for each paired Zigbee device. The temperature parameter is
only visible for ZigBee devices capable of measuring temperature readings. Up to 11 Device screens can show.
NOTE: Device X pages will only show up once devices have been paired.
PARAMETER DETAILS
Configuration Parameters Default Value
Function
Default value: None
Comm. status
Default value: Offline
Read Only
Battery
Default value: None
Read Only
Viconics Technologies Inc. | 7262 Marconi
028-6045-06
Device X
6/7 Configuration
Language Function
Comm. status
Units
Battery
Low backlight
Address
Night backlight
Status
RH display
Temperature
ZigBee Device Function
Shows status of installed ZigBee device.
None: No status reported to Room Controller
Window: Window sensor installed
Door: Door sensor installed
Motion: Device set to detect motion
Status: Updates the BACnet status of the sensor. No action is taken by the Room
Controller.
Remove: Removes device from Device list
Water: Water Leak sensor installed
Choices: None, Window, Door, Motion, Status, Remove and Water
Communication Status
Shows if device is communicating with Room Controller
Not paired: Device not paired
Online: Device paired and online
Offline: Device paired but offline
Invalid: Device was paired and Room controller detected a communication error
(selected function does not match paired sensor functionality).
Display Readings: Nor paired, Online, Offline and Invalid
Wireless Device Battery
Shows current status of battery in wireless device.
Display Readings: None, Normal or Low
| Montreal, Quebec, Canada | H2R 2Z5
None English
Online
°C
None
60 %
0xXXXX
5 %
No motion
Disable
XX °F
Significance and Adjustments
| Tel: (514) 321-5660 | Fax: (514) 321-4150 | www.viconics.com | sales@viconics.com
November 2017
77