Viconics VTR8300 Series User Interface Manual page 39

Temp. sensor
Default value: Wired
RH sensor
Default value: Internal
Viconics Technologies Inc. | 7262 Marconi
028-6045-06
Room Temperature Sensor
Sets the source of the indoor room temperature. This parameter allows the user
to designate either the Room Controller or any of the bound wireless devices that
support temperature to act as the source for the room temperature.
Wired: Sets the thermistor connected to UI20 (RS) as the source to report room
temperature.
Internal: Sets the Room Controller as the source for the room temperature.
WL IO: Sets the selected wireless ZigBee Pro device as the source for the room
temperature. Only one device can be selected.
WL 1 to WL 10: Sets the selected wireless ZigBee Pro device as the source for the
room temperature. Only one device can be selected.
WL GP: Sets the selected ZigBee Green Power device as the source for the room
temperature.
Note: The Room Controller uses the internal temperature sensor only if UI20 (RS)
terminal is empty. If a valid temperature sensor is connected to UI20 terminal, the
Room Controller will automatically disable its internal sensors (Internal, WL IO, WL1
to WL10, WL GP) and use the remote sensor as the control point. Disconnecting the
sensor, or if the sensor is faulty, the Room Controller will automatically re-enable its
internal temperature sensor.
Choices: Internal, Wired, WL IO, WL1 to WL10, and WL GP
Relative Humidity Sensor
Sets the source of the indoor room humidity. This parameter allows the user to
designate either the Room Controller (only models supporting humidity) or any of
the bound wireless devices that support humidity to act as the source for the room
humidity.
Internal: Sets the Room Controller as the source for the room humidity.
WL 1 to WL 10: Sets the selected wireless ZigBee Pro device as the source for the
room humidity. Only one device can be selected.
WL GP: Sets the selected ZigBee Green Power device as the source for the room
humidity.
Choices: None, Internal, WL1 to WL10, and WL GP
| Montreal, Quebec, Canada | H2R 2Z5 | Tel: (514) 321-5660 | Fax: (514) 321-4150 | www.viconics.com | sales@viconics.com
November 2017
39