Viconics VTR8300 Series User Interface Manual page 46

46
Standby screen
Default value: No
Lock screen
Default value: No
Contrast
Default value: 0
Viconics Technologies Inc. | 7262 Marconi
028-6045-06
Standby Screen
When the device is left unattended for 150 seconds, the standby image will appear.
A custom image can be uploaded using the Uploader Tool.
No: No Stand by image (Screen dims when no motion is detected)
Yes: Stand by Image is displayed after 150 seconds
Occ. Only: Standby image displays after 150 seconds. Screen turns off after 30
minutes only in occupied or override mode.
Screen saver: Standby image displays after 150 seconds. Screen turns off after 30
minutes only in unoccupied or standby mode
Choices: No, Yes, Occupied Only or Screen Saver
Lock Screen
Prevents the user from accessing the Room Controller until a password is entered.
Screen lockout starts 150 seconds after no activity on the Room Controller (when
standby image appears).
This functionality is enabled only if the below conditions are met:
• Standby image loaded
• Standby Screen = "Yes" or "Screen Saver"
• User Password = not 0
Choices: No or Yes
Contrast
Control screen contrast and brightness.
Range: -5 to 5
| Montreal, Quebec, Canada | H2R 2Z5 | Tel: (514) 321-5660 | Fax: (514) 321-4150 | www.viconics.com | sales@viconics.com
November 2017