Viconics VTR8300 Series User Interface Manual page 21

Channel
Default value: 10
Network status
Read Only
Permit join
Default value: On
Viconics Technologies Inc. | 7262 Marconi
028-6045-06
ZigBee Channel
The frequency or channel on which the ZigBee network transmits and receives data.
The channel of the Coordinator must match that of the routers to exchange data.
The default value of 10 is NOT a valid channel. The valid range of available channel is
from 11 to 25.
Using channels 15 and 25 is recommended.
Range: 10 to 25
ZigBee Network Status
Shows the current status of the ZigBee network.
No NWK: ZigBee configured but no network joined
Joined: ZigBee network joined
Online: Communicating (Exchanging data)
Display Readings: No NWK, Joined, Online
Permit Join
Changing this value to "Off" on the Coordinator prevents any new ZigBee devices
from joining the network.
Permit join can be On/Off when the Room Controller is a Coordinator, however the
parameter is read only when the Room Controller is a router. If not set to off manually
the Permit join will stay On for 3 hours.
Choices: On or Off
| Montreal, Quebec, Canada | H2R 2Z5 | Tel: (514) 321-5660 | Fax: (514) 321-4150 | www.viconics.com | sales@viconics.com
November 2017
21