DISCLAIMERS • The VTR8300 series Room Controller is only to be used in conjunction with the VC3000 line voltage switching relay pack. Together they are used as operating controls for high voltage fan coil units. • If replacing an existing Line Voltage FCU Controller, label the wires before removal of the Room Controller.
Page 3
• A short circuit or wrong wiring may permanently damage Room Controller or equipment. • All VTR8300 series Room Controllers are designed for use as operating controls only and are not safety devices. Tampering with the devices or unintended application of the devices will result in a void of warranty.
12. Gently align the cover with the top of the base and snap into place from the bottom (Figure 3). 13. Install the security screw. Figure 2 Install the base Figure 3 Reinstall cover Viconics Technologies Inc. www.viconics.com sales@viconics.com 028-0414-07 April 2019...
14 - COM - 14 - COM - • NOTE: See VTR8300 BACnet ® integration manual for more details Network Wiring Topology Star Topology Daisy Chained Topology Mixed Daisy Chained & Star Topology Viconics Technologies Inc. www.viconics.com sales@viconics.com 028-0414-07 April 2019...
Fan Mode Temperature Units NOTE: User HMI is configurable and allows display functions such as Date, Time, Humidity, Outdoor Temperature, Setpoint, and others to be enabled or disabled by setting various parameters. Viconics Technologies Inc. www.viconics.com sales@viconics.com 028-0414-07 April 2019...
Enter setpoint & display settings Service View Enter status and service view Test Outputs Enter output testing mode Language Selection Enter language selection settings General Note: Return to Adjustable parameter home screen Nonadjustable parameter Viconics Technologies Inc. www.viconics.com sales@viconics.com 028-0414-07 April 2019...