Viconics VTR8300 Series User Interface Manual page 71

Ecosystem Settings
The Ecosystem Settings screens show the network status, the number of paired devices as well as information for each paired
device. A maximum of 11 devices (including 1 ZigBee Green Power device) can be paired to each Room Controller. Tap forward
arrow to obtain information on each paired ZigBee device.
PARAMETER DETAILS
Configuration Parameters Default Value
Network status
Default value: Not det.
Read Only
Permit join
Default value: Off
Viconics Technologies Inc. | 7262 Marconi
028-6045-06
Ecosystem Settings
6/7 Configuration
Language Network status
Permit join
Units
Permit timeout
Low backlight
Paired devices
Night backlight
RH display
ZigBee Network Status
Shows current status of ZigBee network.
Pwr on: ZigBee module detected but not configured
No NWK: ZigBee configured but no network joined
Joined: ZigBee network joined
Online: Communicating
Display Readings: Pwr on, No NWK, Joined and Online
Permit Join
Setting to 'On' allows the Room Controller to pair with a ZigBee device. Value must
be set to 'On' to pair with initial device and then set to 'Off' if user wants to prevent
additional ZigBee devices from joining the network. Changing this value to "Off" on
the Coordinator prevents any new ZigBee devices from joining the network.
Permit join can be On/Off when the Room Controller is a coordinator, however the
parameter is read only when the Room Controller is a router. Permit join stays On for 3
hours.
On: Allows Room Controller to pair with wireless ZigBee device
Off: Prevents Room Controller from pairing with wireless ZigBee device, or prevent
any additional ZigBee devices from joining network.
Choices: On or Off
| Montreal, Quebec, Canada | H2R 2Z5
Not det. English
Off
°C
0 min
60 %
0
5 %
Disable
Significance and Adjustments
| Tel: (514) 321-5660 | Fax: (514) 321-4150 | www.viconics.com | sales@viconics.com
November 2017
71