Viconics VTR8300 Series User Interface Manual page 28

28
Configuration Parameters Default Value
RUI1 config
Default value: None
RBI2 config
Default value: None
Occupancy src
Default value: Motion
Smart recovery
Default value: Off
Viconics Technologies Inc. | 7262 Marconi
028-6045-06
Remote Universal Input Configuration No. 1
None: No function associated with the input. Input can be used for remote network
monitoring.
Filter: "Filter alarm" shows on Room Controller screen when input is energized.
Service: "Service alarm" shows on Room Controller screen when input is energized.
COC/NH: change over dry contact(normally heat). Used for hot/cold water or air
change over switching in 2 pipe systems.
COC/NC: change over dry contact (normally cool). Used for hot/cold water or air
change over switching in 2 pipe systems.
COS: change over sensor. Used for hot/cold water or air changeover switching in 2
pipe systems.
Choices: None, Filter, Service, COC/NH, COC/NC and COS
Remote Binary Input Configuration No. 2
None: No function associated with input. Input can be used for remote network
monitoring.
Filter: "Filter alarm" shows on Room Controller screen when input is energized.
Service: "Service alarm" shows on Room Controller screen when input is
energized.
Choices: None, Filter and Service
Occupancy Source
Motion: Occupancy status received from motion sensor.
Schedule: Occupancy status determined by the schedule.
Choices: Motion and Schedule
Enable Smart Recovery
Off: No smart recovery. The occupied schedule time is the time at which the system
will restart.
On: Smart recovery active. The occupied schedule time is the time at which the
desired occupied temperature will be attained. The Room Controller automatically
optimizes the equipment start time. In any case, the latest a system will restart is 10
minutes prior to the occupied period time.
Smart recovery is automatically disabled if BI16 is configured to remote NSB.
Choices: Off or On
| Montreal, Quebec, Canada | H2R 2Z5
Significance and Adjustments
| Tel: (514) 321-5660 | Fax: (514) 321-4150 | www.viconics.com | sales@viconics.com
November 2017