Setpoint Adjustment Heating - Viconics VTR8300 Series User Interface Manual

16
Setpoint Adjustment for Heating Mode
In automatic mode, setpoint showing at the top of the set point bar located directly under the blue line represents the actual oc-
cupied cooling setpoint.
During occupied setpoints adjustment, large digits are temporarily used to display the occupied Cooling
Setpoint or occupied Heating Setpoint. The actual setpoint is dependent on the last effective demand (heating or cooling). The
setpoint on top of the red line represents the actual occupied heating setpoint. The differential between the occupied heating and
cooling setpoint is defined by the minimum deadband configuration parameter.
Normal temperature display resumes after setpoints are adjusted and the actual occupied heating and cooling setpoints show in
the setpoint bar.
Automatic Heating/Cooling Mode
Viconics Technologies Inc. | 7262 Marconi | Montreal, Quebec, Canada | H2R 2Z5 | Tel: (514) 321-5660 | Fax: (514) 321-4150 | www.viconics.com | sales@viconics.com
028-6045-06 November 2017