Safety; Symbols Used; Warnings - MICRO-EPSILON capaNCDT 6110 IP Operating Instructions Manual

Safety

1.
Knowledge of the operating instructions is a prerequisite for equipment operation.
1.1
The following symbols are used in this instruction manual:
i
1.2
Disconnect the power supply before touching the sensor surface.
> Risk of injury
> Static discharge
Connect the power supply and the display/output device in accordance with the safety regulations for electri-
cal equipment.
> Risk of injury
> Damage to or destruction of the sensor and/or controller
Avoid shocks and impacts to the sensor and controller.
> Damage to or destruction of the sensor and/or controller
The power supply must not exceed or continuously fall below the specified limits.
> Damage to or destruction of the sensor and/or controller
capaNCDT 61xx/IP
Safety

Symbols Used

Indicates a hazardous situation which, if not avoided, may result in minor or moder-
ate injury.
Indicates a situation that may result in property damage if not avoided.
Indicates a user action.
Indicates a tip for users.

Warnings

Seite 5