Scaling The Measuring Values - MICRO-EPSILON capaNCDT 6110 IP Operating Instructions Manual

The measuring data consists of a counter, the packet length m and the measuring values. The packet length
m determines how many measuring values are transmitted. The packet length m is the number of measu-
ring values sampled from the electronic, since the last request of measuring data, but is limited to the last
20 measuring values. The first measuring value in the data[] packet is the oldest value sampled, the last is the
newest value sampled.
Data[0]
Data[1]
Data[2]
Data[3]
Data[4]
Data[5]
Data[6]
Data[7]
Data[8]
Data[9]
Data[10] Measuring value 2 [23:16]
Data[11] Measuring value 2 [31:24]
Data[..]
Data[..]
Data[..]
Data[..]
5.2.2
By default, 24-bit measuring values are transmitted. That is why:
0x0
0xF00000 = 100 % of sensor measuring value
If the sensor is out of measuring range, so correspondingly larger measuring values are output.
capaNCDT 61xx/IP
Counter [7:0]
Counter [15:8]
Packet length m [7:0]
Filler byte [7:0]
Measuring value 1 [7:0]
Measuring value 1 [15:8]
Measuring value 1 [23:16]
Measuring value 1 [31:24]
Measuring value 2 [7:0]
Measuring value 2 [15:8]
. . .
Measuring value m [7:0]
Measuring value m [15:8]
Measuring value m [23:16]
Measuring value m [31:24]

Scaling the Measuring Values

= 0 % of sensor measuring value
unsigned short
unsigned char
unsigned char
signed integer
signed integer
signed integer
Page 31