Recalling Channel Library Settings; Erasing Channel Library Settings - Yamaha AW2400 Owner's Manual

Channel Library Operation

Recalling Channel Library settings

The procedure for recalling stored library settings is as
follows.
1
Call the CH VIEW screen Library page by
either pressing the [VIEW] key as many
times as necessary, or by pressing the [F2]
key after pressing the [VIEW] key.
2
Use the [DATA/JOG] dial or [INC]/[DEC]
keys to select the library setting to be
recalled.
The setting highlighted by a dotted frame is currently
selected for recall.
3
Move the cursor to the RECALL button and
press the [ENTER] key.
A popup window confirming the recall operation will
appear.
12
HINT
• Pressing the [F1] key while holding the Display section
[SHIFT] key has the same effect as the RECALL button.
4
To actually recall the selected setting move
the cursor to the OK button and press the
ENTER] key.
HINT
• Parameters that do not exist in the target channel will be
ignored.
• INSERT EFF settings as shown in the CH VIEW screen View
page are not included in the channel libraries and will not
change.
• When the target channel is a stereo channel or a channel
pair, all parameters except phase and pan will be set to the
same values (phase and pan will not change).
• When data cannot be recalled to the selected channel the
"Recall Channel Data Conflict!" error message will appear.
110
AW2400 Owner's Manual

Erasing Channel Library settings

The procedure for erasing unwanted library settings is as
follows.
NOTE
• Read-only library settings (those marked with an
be erased.
1
Call the CH VIEW screen Library page by
either pressing the [VIEW] key as many
times as necessary, or by pressing the [F2]
key after pressing the [VIEW] key.
2
Use the [DATA/JOG] dial or [INC]/[DEC]
keys to select the library setting to be
erased.
The setting highlighted by a dotted frame is currently
selected to be erased.
3
Move the cursor to the CLEAR button and
press the [ENTER] key.
A popup window confirming the clear operation will
appear.
HINT
• Pressing the [F3] key while holding the Display section
[SHIFT] key has the same effect as the CLEAR button.
4
To actually erase the selected setting move
the cursor to the OK button and press the
[ENTER] key.
icon) cannot