Yamaha AW2400 Owner's Manual page 50

Direct recording and Mixed recording
■ Mixed recording
With this method, you can send multiple input channels to Bus 1 or Bus 2, and assign
the mixed signal to one through four tracks. Mixed recording requires fewer tracks, but
you will need to decide on the final volume, pan, and tone of each instrument at the time
of recording (you will not be able to adjust these parameters independently after record-
ing.)
6
Track 1
Track 2
Track 3
Track 4
Track 5
Track 6
Recorder section
NOTE
• The way in which you assign the input signals to tracks will depend on the
method you choose.
50
AW2400 Owner's Manual
[MIC/LINE INPUT]
jacks
Input
channels
Bus 1
Bus 2
Stereo
output
channel
Mixer section