Yamaha AW2400 Owner's Manual page 249

■ TREMOLO
Two input, two output tremolo effect.
Parameter Range
FREQ. 0.05–40.00 Hz
DEPTH 0–100%
WAVE Sine, Tri, Square
LSH F 21.2 Hz–8.00 kHz
LSH G -12.0 to +12.0 dB
EQ F 100 Hz–8.00 kHz
EQ G -12.0 to +12.0 dB
EQ Q 10.0–0.10
HSH F 50.0 Hz–16.0 kHz
HSH G -12.0 to +12.0 dB
■ HQ. PITCH
One input, two output high-quality pitch shifter (Available for internal effects 1 and 2.).
Parameter Range
PITCH -12 to +12 semitones
FINE -50 to +50 cents
DELAY 0.0–1000.0 ms
FB. GAIN -99 to +99%
MODE 1–10
■ DUAL PITCH
Two input, two output pitch shifter.
Parameter Range
PITCH 1 -24 to +24 semitones
FINE 1 -50 to +50 cents
LEVEL 1 -100 to +100%
PAN 1 L63 to R63
DELAY 1 0.0–1000.0 ms
FB. G 1 -99 to +99%
PITCH 2 -24 to +24 semitones
FINE 2 -50 to +50 cents
LEVEL 2 -100 to +100%
PAN 2 L63 to R63
DELAY 2 0.0–1000.0 ms
FB. G 2 -99 to +99%
MODE 1–10
■ ROTARY
One input, two output rotary speaker simulator.
Parameter Range
ROTATE STOP, START
SPEED SLOW, FAST
SLOW 0.05–10.00 Hz
FAST 0.05–10.00 Hz
DRIVE 0–100
ACCEL 0–10
LOW 0–100
HIGH 0–100
Modulation speed
Modulation depth
Modulation waveform
Low shelving filter frequency
Low shelving filter gain
EQ (peaking type) frequency
EQ (peaking type) gain
EQ (peaking type) bandwidth
High shelving filter frequency
High shelving filter gain
Pitch shift
Pitch shift fine
Delay time
Feedback gain (plus values for normal-phase feedback, minus values for reverse-phase feedback)
Pitch shift precision
Channel #1 pitch shift
Channel #1 pitch shift fine
Channel #1 level (plus values for normal phase, minus values for reverse phase)
Channel #1 pan
Channel #1 delay time
Channel #1 feedback gain (plus values for normal-phase feedback, minus values for reverse-phase
feedback)
Channel #2 pitch shift
Channel #2 pitch shift fine
Channel #2 level (plus values for normal phase, minus values for reverse phase)
Channel #2 pan
Channel #2 delay time
Channel #2 feedback gain (plus values for normal-phase feedback, minus values for reverse-phase
feedback)
Pitch shift precision
Rotation stop, start
Rotation speed (see SLOW and FAST parameters)
SLOW rotation speed
FAST rotation speed
Overdrive level
Acceleration at speed changes
Low-frequency filter
High-frequency filter
Effects Parameters
Description
Description
Description
Description
AW2400 Owner's Manual
249