Yamaha AW2400 Owner's Manual page 59

4
To disengage a pair, move the cursor to the
corresponding STEREO button and press
the [ENTER] key.
A popup window will ask you to confirm that you
want to disengage the pair.
5
Move the cursor to the OK button and press
the [ENTER] key to confirm and disengage
the pair.
The STEREO button will change to a MONOx2 but-
ton. If you move the cursor to the CANCEL button
rather than the OK button and press the [ENTER] key
the disengage-pair operation will be aborted and the
channels will remain paired.
HINT
• All channel pairs can be disengaged at once by pressing the
[F1] key while holding the Display section [SHIFT] key.
• For paired channels set the pan control to either full left or
right to achieve nominal level (i.e. the same level before and
after the pan control). For channels that are not paired nomi-
nal level is achieved with the pan control set to center.
■ Channel Pairing Using
the Panel Keys
1
Use the Layer section keys to select the mix
layer containing the channels you want to
pair.
2
While holding the [SEL] key of one channel
that you want to pair, press the [SEL] key of
the adjacent channel.
A popup window will appear, asking you to confirm
the pairing.
The popup window contains the same items as the
MONITOR screen used for channel pairing.
HINT
• The [INPUT SEL] 1–8 keys can also be used to pair input
channels 1–8.
3
Move the cursor to the appropriate button
in the popup window and press the
[ENTER] key.
The channels specified via the [SEL] keys will be
paired.
4
To disengage pairing, press the [SEL] key
of one of the paired channels while holding
the [SEL] key of the other channel.
A popup window will ask you to confirm that you
want to disengage the pair.
5
To disengage the pair, press the OK button.
If you decide not to disengage the pair,
move the cursor to the CANCEL button and
press the [ENTER] key.
AW2400 Owner's Manual
Pairing channels
6
59