Yamaha AW2400 Owner's Manual page 170

Managing Your Songs
■ Loading and Sorting Songs
Here's how to load an existing song from the hard disk.
1
Call the Song List page by either pressing
the Work Navigate section [SONG] key as
many times as necessary, or by pressing
the [F1] key after pressing the [SONG] key.
The SONG screen Song List page will appear. The
currently selected song in the Song List will be high-
lighted (inverted).
2
To change the order of the songs move the
cursor to the SORT box, use the [DATA/
JOG] dial to select the desired sort crite-
rion, and then press the [ENTER] key.
Using the SORT box songs can be sorted according to
the following criteria:
• NAME ........Song names in alphabetical order.
• OLD ...........The order in which the songs were
saved, from newest to oldest.
• SIZE ...........Song size, from largest to smallest.
3
To load a song move the cursor to a loca-
tion outside the SORT box, and use the
[DATA/JOG] dial to select the song to be
loaded.
The line enclosed by the dotted frame indicates the
selected song.
4
Move the cursor to the LOAD button in the
screen, and press the [ENTER] key.
A popup window will ask you whether you want to
save the current song.
18
HINT
• Pressing the [F2] key while holding the Display section
[SHIFT] key has the same effect as the LOAD button.
5
Move the cursor to either YES (if you want
to save the current song) or NO (if you do
not want to save the current song), and
press the [ENTER] key.
If you select "YES", the song will be loaded after the
current song has been saved. If you select "NO", the
song will be loaded and any changes to the current
song will be discarded.
170
AW2400 Owner's Manual
■ Saving the current song
Here's how to save the current song to the hard disk.
1
2
SORT Box
3
The load operation can be aborted by moving the cur-
sor to the CANCEL button and pressing the [ENTER]
key.
NOTE
• If you select NO, all changes you made after last saving the
current song will be lost.
Call the Song List page by either pressing
the Work Navigate section [SONG] key as
many times as necessary, or by pressing
the [F1] key after pressing the [SONG] key.
The SONG screen Song List page will appear.
Move the cursor to the SAVE button and
press the [ENTER] key.
A popup window will ask you to confirm that you
want to save the current song.
HINT
• Pressing the [F1] key while holding the Display section
[SHIFT] key has the same effect as the SAVE button.
To save the song, move the cursor to the
OK button and press the [ENTER] key.
The song will be saved and the display will revert to
the Song List (step 1). If you move the cursor to the
CANCEL button (instead of the OK button) and press
the [ENTER] key, the Save operation will be can-
celled.
NOTE
• The song save operation always saves the current song,
regardless of the song that is selected in the list.
• You cannot save a song that is protected. If for example you
have edited the mixer settings and need to save the song, you
must disable the protect setting and then save the song.
HINT
• If necessary, you can change the name of the song before
you save it ( → p. 169).
• In the following situations, a popup window will ask whether
you want to save the current song; when you load an existing
song from the hard disk, when you create a new song, or
when you shut-down the AW2400.
• We recommend that you frequently save the song you are
working on or enable the Auto Save function ( → p. 211) as a
safeguard against data loss due to accidents such as the
AW2400's power cable being inadvertently disconnected.