Storing Effect Library Settings; Erasing Effect Library Settings - Yamaha AW2400 Owner's Manual

Storing Effect Library settings

Save the current effect setting from any one of the effect
processors (1–4) to the effect library.
NOTE
• New settings cannot be stored to read-only library numbers (those
marked with an icon).
• If store to a library number that contains previously-stored data,
the previous data will be overwritten.
1
Press the Selected Channel section
[EFFECT] key so that its indicator lights.
2
Press one of the Selected Channel section
knobs 1–4 to access EFFECT screen for the
effect processor that will be the store
source.
3
Call the FX Lib. page.
Refer to "Call the Effect Library Screen" on page 122
for details.
4
Move the cursor to the list, and use the
[DATA/JOG] dial or [INC]/[DEC] keys to
select the library number to which the set-
tings are to be stored.
The setting highlighted by a dotted frame is currently
selected for storage.
5
Move the cursor to the STORE button and
press the [ENTER] key.
The NAME EDIT popup window will appear.
HINT
• Pressing the [F2] key while holding the Display section
[SHIFT] key has the same effect as the STORE button.
6
If necessary enter a name for the selected
library setting, move the cursor to the OK
button, and press the [ENTER] key (refer to
page 32 for details on name entry).
The library setting will be stored.

Erasing Effect Library settings

The procedure for erasing unwanted library settings is as
follows.
NOTE
• Read-only library settings (those marked with an
be erased.
1
Call the FX Lib. page.
Refer to "Call the Effect Library Screen" on page 122
for details.
2
Move the cursor to the list, and use the
[DATA/JOG] dial or [INC]/[DEC] keys to
select the library setting to be erased.
The setting highlighted by a dotted frame is currently
selected to be erased.
3
Move the cursor to the CLEAR button and
press the [ENTER] key.
A popup window confirming the clear operation will
appear.
HINT
• Pressing the [F3] key while holding the Display section
[SHIFT] key has the same effect as the CLEAR button.
4
To actually erase the selected setting move
the cursor to the OK button and press the
[ENTER] key.
AW2400 Owner's Manual
Effect Library Operations
icon) cannot
14
123