Inserting An Effect Into A Channel - Yamaha AW2400 Owner's Manual

Effects can be directly inserted into the signal path of specified channels as follows.
1
Referring to the instructions in "Recalling
Effect Library settings" on page 116, recall
an effect library preset that is based on the
effect you want to use.
2
Call the CH VIEW screen View page by
either pressing the Selected Channel sec-
tion [VIEW] key as many times as neces-
sary, or by pressing the [F1] key after
pressing the [VIEW] key.
The signal flow and mix parameters for each channel
are displayed in this page.
3
Use the Layer section keys, [INPUT SEL]
keys, [SEL] keys, or [STEREO SEL] key to
select the channel into which the effect is to
be inserted.
The signal flow for the selected channel will be dis-
played.
To insert an effect that is to be used on just one instru-
ment connected to the AW2400, for example, insert
the required effect into the appropriate input channel.
The example diagram shows input channel 1 selected
for effect insertion.
NOTE
• Effects cannot be inserted into the effect send master or
effect return channels.

Inserting an Effect Into a Channel

INSERT EFF
Inserting an Effect Into a Channel
4
Move the cursor to the field to the right of
INSERT EFF on the display and press the
[ENTER] key.
A popup window allowing selection of the effect to be
inserted as well as an I/O card channel to and from
which the signal will be sent/received will appear.
The popup window includes the following items.
• NONE .............. No effect inserted.
• EFF1–4............ Effect 1–4 inserted.
NOTE
• The same effect number can not be selected for multiple
channels.
• Inserted internal effects cannot be used with the effect
sends and returns.
• SLOT1–16 ....... Select one of these options to
insert an external effect unit via an
I/O card. If SLOT1 is selected, for
example, Output channel 1 of the I/
O card is used to send the signal to
the external effect processor, and
input channel 1 of the same card is
used to return the output from the
external effect processor to the
channel.
HINT
• When SLOT1–16 is selected for a stereo channel (stereo out-
put or bus master), an odd-even channel pair ("SLOT 1-2" for
example) will be assigned to the stereo channels and
inserted.
When an item other than NONE is selected, an abbre-
viation of the insert destination will appear to the right
of the colon (" : ").
The meanings of the abbreviations are as follows.
Abbreviations
SEND Effect send/return operation (not inserted in
(EFF1–4 only) any channel).
IN1–IN16 Inserted in input channel 1–16.
TR1–TR24 Inserted in track channel 1–24.
STEREO Inserted in stereo output channel.
BUS1–2 Inserted in bus master channel 1, 2.
AUX1–4 Inserted in AUX send master channel 1–4.
AW2400 Owner's Manual
Descriptions
119
14