Yamaha AW2400 Owner's Manual page 53

● Monitor signal flow during recording
Track
channels
This completes the patch setup for direct recording.
NOTE
• If you switch the RECORD display page after doing the patch setup all your patch
settings will be undone and lost (a confirmation popup window will appear).
Remember to stay on the same RECORD page until recording is finished.
Recorder section
Track 1
Track 2
from the input
channels
Track 3
Track 4
Track 5
Stereo bus
Direct recording and Mixed recording
Stereo
output
channel
Mixer section
AW2400 Owner's Manual
6
53