Song Playback Related Parameters (Guide Function, Channel Settings, Repeat Settings) - Yamaha PSR-A3000 Owner's Manual

Song Playback Related Parameters (Guide Function, Channel
settings, Repeat settings)
The instrument has a variety of Song playback functions—repeat playback, various guide settings, etc.—which can
be accessed in the display below.
Call up the operation display.
[FUNCTION]  TAB [E] MENU 1  [H] SONG SETTING  TAB[E][F] GUIDE/CHANNEL or
OTHERS
GUIDE/CHANNEL Page
[A]/[B] GUIDE MODE
[I] PHRASE MARK
REPEAT
[2 ]/
TRACK 2
[3 ]
[4 ]/
TRACK 1
[5 ]
[6 ]/
AUTO CH SET
[7 ]
See page 149.
This parameter is available only when the current Song contains Phrase
Marks, which specify certain locations (of several measures each) in the
Song. When this is set to ON, the section corresponding to the Phrase Mark
G
(specified via the SONG [
back repeatedly. Note that this parameter can be set only when the Song
playback is stopped.
These parameters determine which MIDI channel in the Song data is
assigned to the left- or right-hand part of the Guide function and the Song
Score function. In addition, the setting here also determines which channels
are assigned to the [TR1] (TRACK 1) and [TR2] (TRACK 2) buttons.
When set to "ON," this automatically sets the proper MIDI channels for the
Right- and Left hand parts pre-programmed in the commercially available
Song data. Normally, this should be set to "ON."
H
] (REW) and [ ] (FF) buttons) is played
PSR-A3000 Owner's Manual
3
147