Installing An Optional Card - Yamaha AW2400 Owner's Manual

■ Available optional cards
By installing a separately sold mini-YGDAI card in a rear-
panel slot, you can add analog input/output jacks to the
AW2400 or allow connection of external digital devices.
The following types of cards can be used.
Number of
Card type Model
channels
MY4-AD
MY8-AD
AD card
MY8-AD24
MY8-AD96
MY4-DA
DA card
MY8-DA96
MY8-AE
MY8-AE96
MY8-AE96S
MY16-AE
Digital I/O card
MY8-AT
MY16-AT
MY8-TD
MY16-TD
Waves Plug-in
Y96K
DSP card
mLAN card MY16-mLAN
Refer to the Yamaha Pro Audio global website for the
most recent information on I/O cards.
http://www.yamahaproaudio.com

■ Installing an optional card

Before installing a card, you must check the Yamaha web-
site to make sure that this device is compatible.
http://www.yamahaproaudio.com
Installing an optional card
Digital Bit
format depth
4 24 bit
20 bit
—
8
24 bit
4 20 bit
—
8 24 bit
8
AES/EBU
16
24 bit
8
ADAT
16
8
TASCAM
16
8 ADAT 24bit
16 IEEE1394 24bit
To install an optional mini-YGDAI card, proceed as
follows.
1
Make sure that the power is turned off.
2
Loosen the screws that hold the slot cover
in place, and remove the slot cover.
Keep the removed slot cover in a safe place.
3
Align the edges of the card with the guard
rails inside the slot, and insert the card into
the slot.
Push the card all the way into the slot so that the con-
nector at the end of the card is correctly mated with the
connector inside the slot.
4
Use the screws included with the card to
fasten the card in place.
Malfunctions or incorrect operation may occur if the
card is not fastened.
AW2400 Owner's Manual
Installing an optional card
13
1