Aw2400 Preferences - Yamaha AW2400 Owner's Manual

AW2400 Preferences

The UTILITY screen Preference page provides a number of basic "preference" parameters for the
AW2400 operating environment, including digital input/output setup, copy protection, and others.
To call this page press the Work Navigate section [UTIL-
ITY] key as many times as necessary, or press the [F2] key
after pressing the [UTILITY] key.
A
B
C
D
E
F
This page contains the following items.
1 DIGITAL OUT COPYRIGHT button
Specifies whether SCMS (Serial Copy Management Sys-
tem) copy protect flags will be written into the digital sig-
nal that is output from the DIGITAL STEREO OUT jack.
Protect is enabled if the button is set to ENABLE, and dis-
abled if the button is set to DISABLE.
If copy protect is enabled, you will be able to copy the sig-
nal from the DIGITAL STEREO OUT jack to an MD or
DAT recorder, but it will not be possible to make a second-
generation digital copy from that data.
● When copy protect is enabled
DIGITAL OUT COPYRIGHT= ENABLE
21
DIGITAL STEREO OUT jack
DAT or MD, etc.
210
AW2400 Owner's Manual
AW2400 Preferences
G L
JK I
AW2400
Digital recording
possible
Digital recording
not possible
B CD/DAT DIGITAL REC button
Enables or disables digital recording from the DIGITAL
STEREO IN jack, and importing of digital audio data
from an audio CD or WAV file inserted in the CD-RW
drive.
When this parameter is ON, the following message will be
displayed.
H
M
If you agree to the conditions stipulated in the "Copyright
N
Notice" (→ p. 7), select [OK]. Recording and importing of
digital audio data will be enabled when you select [OK].
HINT
• The CD/DAT DIGITAL REC button will always be set to the default
DISABLE setting when you turn on the power.
C NUDGE PLAY MODE
Selects the playback method that will be used by the
Nudge function (a function that lets you use the [JOG ON]
key and [DATA/JOG] dial to search for a location). Press
the [ENTER] key to confirm your selection.
• AFTER .......... Play repeatedly for the duration specified
by the NUDGE TIME, starting at the cur-
rent location.
• BEFORE ....... Play repeatedly for the duration specified
by the NUDGE TIME, ending at the cur-
rent location.
MODE: BEFORE
Current location
D NUDGE TIME
Specifies the duration (Nudge Time) of each repeat played
by the Nudge function. The nudge time can be set from 25
to 800 ms in 1 ms (millisecond) steps.
E PREROLL TIME
Specifies the duration of the preroll (the amount of play-
back time before the punch-in point) when you use Auto
Punch-in from 0 to 20 seconds.
MODE: AFTER
Current location