Storing Automix Settings; Recalling Automix Settings; Erasing Automix Settings - Yamaha AW2400 Owner's Manual

Storing Automix settings

Storing the current Automix data to the Automix library.
NOTE
• If you select and store to a library number that contains previously-
stored data, the previous data will be overwritten.
1
Call the AUTOMIX screen Library page by
either pressing the [AUTOMIX] key as many
times as necessary, or by pressing the [F4]
key after pressing the [AUTOMIX] key.
2
Use the [DATA/JOG] dial or [INC]/[DEC]
keys to select the library number to which
the data is to be stored.
The data highlighted by a dotted frame is currently
selected for storage.
3
Move the cursor to the STORE button and
press the [ENTER] key.
The NAME EDIT popup window will appear.
HINT
• Pressing the [F2] key while holding the Display section
[SHIFT] key has the same effect as the STORE button.
4
As required, enter a name for the selected
Automix data, move the cursor to the OK
button, and press the [ENTER] key (refer to
page 32 for details on name entry).
The automix setting will be stored.

Recalling Automix settings

Recalling stored Automix data from the library.
1
Call the AUTOMIX screen Library page by
either pressing the [AUTOMIX] key as many
times as necessary, or by pressing the [F4]
key after pressing the [AUTOMIX] key.
2
Use the [DATA/JOG] dial or [INC]/[DEC]
keys to select the library data to be
recalled.
The data highlighted by a dotted frame is currently
selected for recall.
3
Move the cursor to the RECALL button and
press the [ENTER] key.
A popup window confirming the recall operation will
appear.
HINT
• Pressing the [F1] key while holding the Display section
[SHIFT] key has the same effect as the RECALL button.
4
To actually recall the selected data move
the cursor to the OK button and press the
[ENTER] key.
The library data will be recalled.

Erasing Automix settings

Erasing unneeded Automix data from the library.
NOTE
• Erased Automix data cannot be recovered. Use this function with
caution.
1
Call the AUTOMIX screen Library page by
either pressing the [AUTOMIX] key as many
times as necessary, or by pressing the [F4]
key after pressing the [AUTOMIX] key.
2
Use the [DATA/JOG] dial or [INC]/[DEC]
keys to select the Automix data to be
erased.
The data highlighted by a dotted frame is currently
selected to be erased.
3
Move the cursor to the CLEAR button and
press the [ENTER] key.
A popup window confirming the clear operation will
appear.
HINT
• Pressing the [F3] key while holding the Display section
[SHIFT] key has the same effect as the CLEAR button.
4
To actually erase the selected data move
the cursor to the OK button and press the
[ENTER] key.
AW2400 Owner's Manual
Automix Library Operation
191
19