Changing Eq/Dynamics Library Names; Recalling Eq/Dynamics Library Settings - Yamaha AW2400 Owner's Manual

EQ/Dynamics Processor Library Operation
F Buttons
These buttons execute the RENAME, RECALL,
STORE, and CLEAR functions. For details on their
operation refer to the following explanations.
Changing EQ/Dynamics Library
Names
Here's how you can change the names of the settings in
the libraries.
NOTE
• The names of read-only library settings (those marked with an
icon) cannot be changed.
1
Access the page containing the library to
be edited.
For details on accessing the various library pages refer
to "Accessing the EQ/Dynamics Library screens" on
page 154.
2
Rotate the [DATA/JOG] dial to select the
library setting to be edited.
The setting highlighted by a dotted frame is currently
selected for editing.
HINT
• The [INC]/[DEC] keys can also be used to select library set-
tings.
3
Move the cursor to the RENAME button and
press the [ENTER] key.
The NAME EDIT popup window will appear.
16
HINT
• Pressing the [F4] key while holding the Display section
[SHIFT] key has the same effect as the RENAME button.
4
Enter a name for the selected library set-
ting, move the cursor to the OK button, and
press the [ENTER] key (refer to page 32 for
details on name entry).
This confirms and enters the new name.
156
AW2400 Owner's Manual
Recalling EQ/Dynamics Library
settings
The procedure for recalling stored library settings is as
follows.
1
Access the page containing the library set-
tings to be recalled.
For details on accessing the various library pages refer
to "Accessing the EQ/Dynamics Library screens" on
page 154.
2
Rotate the [DATA/JOG] dial to select the
library setting to be recalled.
The setting highlighted by a dotted frame is currently
selected for recall.
3
Move the cursor to the RECALL button and
press the [ENTER] key.
A popup window confirming the recall operation will
appear.
The following illustration is an example of when the
RECALL button is pressed in the PAN/EQ screen EQ
Lib. page.
HINT
• Pressing the [F1] key while holding the Display section
[SHIFT] key has the same effect as the RECALL button.
4
To actually recall the selected setting move
the cursor to the OK button and press the
[ENTER] key.
HINT
• The recall confirmation popup window can be disabled if
desired. Refer to "AW2400 Preferences" on page 211 for
details.