Macintosh Users - Yamaha AW2400 Owner's Manual

About the CD-ROM included with the AW2400
● Installing the SONAR template file
1
Copy the SONAR template file from the
included CD-ROM to the folder in which
SONAR is installed.
2
Start up SONAR.
3
In the menu bar, select [File] menu ➝ [Open].
4
The "Open file" dialog box will appear.
Choose Cakewalk template files as the type of
file to be loaded. From the list in the dialog
box, choose "Yamaha AW2400 Remote" and
click the [OK] button.
5
In the menu bar, select [Option] ➝
[MIDI Devices].
6
The MIDI Ports window will open. In the Input
Ports field, assign the MIDI device that you
are using.
If you changed the track structure from the
default settings of the template ...
With the Yamaha AW2400 Remote template started,
click the [CONFIG] button in the StudioWare panel
window. A cluster will open at the right.
Drag the [SET MIDI First Track] knob to the first
track number of the MIDI tracks.
* If you use this template, you will not be able to control
the tracks correctly from the AW2400 unless the MIDI
tracks are continuous from 1–16.
* If you set the value to an invalid track (an unused track),
the panel knobs, buttons, or sliders may be shaded. If
this occurs, set the value back to the correct track.
270
AW2400 Owner's Manual

■ Macintosh users

NOTE
• In order to use a remote file, the corresponding software must be
installed.
• Please be aware that the menu names and screens that appear in
the explanation below may differ depending on the software you
are using.
● Installing the Cubase/Nuendo remote
setup file
For Cubase/Nuendo, the procedure is the same as for
the Windows version. (→ p. 269).
● Installing the Logic Pro preference file
1
Start up Logic Pro.
2
In the menu bar, select [Logic Pro] menu ➝
[Preferences] ➝ [Key Commands...].
3
The Key Commands window will open. In the
menu bar, select [Options] ➝ [Import Key
Commands].
4
A dialog box will appear. Select the Logic
preference file (Logic Preferences) from the
included CD-ROM, and click the [Open] but-
ton.
When you import the file, the following settings will
be made.
* Please note that all the previously-specified key com-
mands will be initialized. If you do not want to change
your existing user key command settings, you can manu-
ally make the MIDI channel and CC# settings shown
above.