Yamaha AW2400 Owner's Manual page 25

■ Data entry/control section
B
C
D
E
F
■ Locate/Number section
1
1 [INC] key
Increments (increases) the selected value by 1.
A
B [DEC] key
Decrements (decreases) the selected value by 1.
C [Cursor] keys ([
These keys move the cursor (the blinking frame) around
the screen to select a specific item.
D [JOG ON] key
This key is an on/off switch for the Nudge function which
uses the [DATA/JOG] dial. When this function is on, the
key will light.
E [UNDO/REDO] key
This key cancels the results of a recording or track editing
operation (Undo), or re-executes a cancelled operation
(Redo).
G
HINT
• This key will light if Undo is possible.
• If you press and hold this key, the UNDO LIST screen will appear.
Here you can turn the [DATA/JOG] dial to revert to as many as the
last fifteen operations ( → p. 64).
F [ENTER] key
Use this key to operate an on-screen button, or to execute
a specific function.
G [DATA/JOG] dial
Use this dial to change the value of a parameter. If the
[JOG ON] key is on, this dial operates the Nudge function.
1 [LOCATE] keys
These keys allow you to move directly to preset "locate"
points. These keys are also used for character and number
entry.
B [NUM.LOCK] key
This key allows you to specify a destination locate point in
measures/beats.
B
Parts of the AW2400 and what they do
]/[ ]/[ ]/[ ] keys)
AW2400 Owner's Manual
2
25