Copy - Yamaha AW2400 Owner's Manual

COPY

Copies the specified region of data to the specified loca-
tion of the specified track.
A B
G H I
Start
From
1 2 3 4
Track
To
A B C D
Track
To Start
From
1 2 3 4
Track
To
A B 4 5
Track
NOTE
• If you set From TR to ALL (INS), the copy-destination track will be
moved backward by the size of the copied region. Note that this
may cause the bar lines specified by the tempo map to change
their location relative to the audio data.
• If you set From TR to other than ALL (INS), the copy-destination
track will be overwritten, and the data that follows the copied
region will not be moved backward.
HINT
• Audio data recorded in the sound clip ( → p. 43) can be copied to
an audio track by using the COPY command.
• The metronome of the sound clip is independent of the song
tempo. If you record into the sound clip with the intention of copy-
ing it to an audio track, you should match the tempo ahead of time.
C D E F
J K
End
5 6 7 8
E F G H
COPY
5 6 7 8
6 F G H
■ Parameter list
Parameter Range
1–24
1&2–23&24
ST
A
From TR
ALL (OVER)
ALL (INS)
CLIP
*1
B
From V.TR 1–8
C
From Start Specify a point
D
From End Specify a point
E
Start Measure
On/off
*2
Lock
(indicated by
F
End Measure
"lock" icon)
*2
Lock
1–24
*3
G
To TR 1&2–23&24
ST
*1
H
To V.TR 1–8
I
To Start Specify a point
J
COPY TIMES 1–99
ON/OFF
(indicated by
*4
K
GRID
highlighted GRID
text when on)
*1. V.TR can be selected only if From TR=1–24, 1&2–23&24, or ST.
*2. Measure lock function
E F
( Start Measure Lock, End Measure Lock)
Measure Lock allows a measure/
beat to be specified within a
region to be copied so that it
aligns with the specified mea-
sure/beat in the copy destination.
For example, in a situation in
which you have an abstract or
rubato segment before the in-
tempo performance begins, you
can "Measure Lock" the beginning of the in-tempo segment so that it
is copied to the appropriate location in the destination.
To use the measure lock function, move the cursor to the measure
display field of From Start or From End, specify the measure/beat
location that will be the reference point for the matching, and press
the [ENTER] key. A "lock" icon will appear beside the value that you
specified, and the measure lock function will be turned on for From
Start or From End. (This can be turned on for either Start or End, not
both.)
While the measure lock function is on, the value of that measure dis-
play format setting will be fixed, and cannot be modified. In this state
if you use the counter display format field to specify the From Start
and From End locations, and execute the copy, the location you
specified in the measure display format field will be aligned with the
copy-destination To Start setting.
AW2400 Owner's Manual
List of editing command
Explanation
A single audio track
A pair of adjacent odd-num-
bered/even-numbered audio
tracks
The stereo track
Tracks 1–24 (overwrite onto
the copy-destination)
Tracks 1–24 (insert into the
copy-destination)
Sound clip contents (the
range is specified by CLIP)
Copy-source virtual track
number
Copy-source starting location
Copy-source ending location
Switch the measure lock func-
tion for From Start/From End
A single audio track
A pair of adjacent odd-num-
bered/even-numbered audio
tracks
The stereo track
Copy-destination virtual track
Copy-destination starting
location
Number of copies
Switch the grid function
139
15