Muting A Specific Audio Track; Switching The Virtual Track Of An Audio Track - Yamaha AW2400 Owner's Manual

Muting a specific audio track
1
Call the TRACK screen View page.
2
Move the cursor to the TRACK field, and
use the [DATA/JOG] dial or the [INC]/[DEC]
keys to select the number of the track you
want to mute.
3
Move the cursor to the MUTE button and
press the [ENTER] key.
Muting will be switched on/off.
If a track is muted, the MUTE symbol changes to "●."
When you press the [ENTER] key once again, muting
will be defeated and the MUTE symbol will change to
" ."
HINT
• This mute function switches muting on or off for the recorder
track playback. This also affects the number of simultaneous
playback tracks in the recorder section ( → p. 128). It's a good
idea to mute all unused tracks.
• Since 24-bit songs allow a maximum of 12 playback tracks,
mute cannot be disengaged for tracks 13-24.
• In some cases, depending on the number of tracks that are in
record-ready mode, you won't be able to un-mute a track. In
this case, decrease the number of tracks that are in record-
ready mode, and then un-mute the desired track.
Switching the virtual track of
an audio track
1
Call the TRACK screen Virtual TR page by
either pressing the Work Navigate section
[TRACK] key as many times as necessary,
or by pressing the [F2] key after pressing
the [TRACK] key.
This page contains the following items.
A
B
C
1 Virtual tracks
Indicates the status of virtual tracks 1–8. The virtual
track that is currently selected for each track is indi-
cated by a "●" symbol. Of the virtual tracks that are
currently not selected, those that have been recorded
are indicated by " ", and those that have not yet been
recorded are indicated as "–".
HINT
• When the AW2400 is in its default state, virtual track 1 is
selected for every track.
B Virtual track name
This indicates the name of the virtual track selected by
the cursor. This will indicate "-NO REC-" for tracks
on which nothing has been recorded.
C Tracks
Indicates the track number 1–24.
2
Use the cursor keys to select the virtual
track number that you want to assign to the
desired track.
3
Press the [ENTER] key.
The "●" symbol will be displayed at the position of
the newly-selected virtual track. This virtual track will
now be used for recording/playback.
HINT
• To switch the virtual track of the stereo track, use the TRACK
screen Stereo TR page.
AW2400 Owner's Manual
Audio track operations
15
129