Yamaha AW2400 Owner's Manual page 211

Yamaha professional audio workstation owner's manual
Hide thumbs Also See for AW2400:
Table of Contents

Advertisement

F POSTROLL TIME
Specifies the duration of postroll (the amount of playback
time after the punch-out point) when you use Auto Punch-
out from 0 to 20 seconds.
G DIRECT OUT EXTRACT POSITION
Selects the point in the input channel or track channel
from which the signal will be taken when using DIRECT
OUT. Press the [ENTER] key to confirm your selection.
• PRE FADER..........the signal prior to the channel fader
• POST FADER .......the signal after the channel fader
H STORE CONFIRMATION button
Specifies whether the NAME EDIT popup window
(allowing you to assign a name) will appear when you
store a scene/library.
I RECALL CONFIRMATION button
Specifies whether a popup window will ask you for confir-
mation when recalling a scene or library.
J SYNC CAUTION DIGITAL ST IN button
Determines whether an error message will be displayed
when a signal that is not synchronized with the word clock
source appears at the DIGITAL STEREO IN connector.
K SYNC CAUTION SLOT IN button
Determines whether an error message will be displayed
when a signal that is not synchronized with the word clock
source appears at a digital input on an I/O card installed in
the I/O slot.
L AUTO SAVE button
Enables or disables the Auto Save function. When the
Auto Save function is enabled the current song state will
be backed up to temporary memory when one of the fol-
lowing occurs. If the power is accidentally turned off
before the unit is properly shut down, the song will be
restored from the backup data in temporary memory the
next time the power is turned on.
• Recording is stopped.
• Track editing is ended.
• Import from the CD-RW drive is completed.
• Import of a WAV file is completed.
M AUTO DISPLAY button
Determines whether the display screen related to a key or
knob operated in the Selected Channel section will appear
automatically (ON), or whether the display will remain as
it is and a popup window for the corresponding parameter
will appear (OFF).
N CD/ST TR PLAY MODE MUTE/MIX button
Determines whether the input channels will be output
together with CD or stereo playback (MIX), or whether
only the CD or stereo track signal will be output (MUTE).
AW2400 Owner's Manual
AW2400 Preferences
21
211

Advertisement

Table of Contents
loading

Table of Contents