Using The Recall Safe Function - Yamaha AW2400 Owner's Manual

Using the Recall Safe function

You can specify that specific faders or specific channels will be excluded from Recall operations
when the scene is changed either manually or from an external MIDI device. This function is
called "Recall Safe."
This is convenient, for example, if you are performing a mixdown while switching scenes, but
want to control specific channels manually.
1
Call the RCL Safe page by either pressing
the [SCENE] key as many times as neces-
sary, or by pressing the [F2] key after
pressing the [SCENE] key.
The SCENE screen RCL Safe page will appear.
A
B
C
1 RCL.SAFE button
This button switches Recall Safe between ENABLE
and DISABLE. Move the cursor to this button and
press the [ENTER] key to switch to either ENABLE or
DISABLE.
HINT
• Pressing the [F1] key while holding the Display section
[SHIFT] key has the same effect as the RCL.SAFE button.
17
B MODE field
The recall safe parameters can be selected from the
following:
• ALL button ...........This prevents all parameters in
• FADER button......Only the fader settings will not
• ON button.............Only the [ON] key settings will
HINT
• Both the FADER and ON buttons can be on at the same time.
• When the ALL button is turned on the FADER and ON buttons
are automatically turned off.
NOTE
• Effect return settings are not affected by Recall Safe.
162
AW2400 Owner's Manual
Using the Recall Safe function
D
the scene from being recalled.
The entire scene is "recall safe"
and no change will occur if it is
inadvertently recalled.
be recalled.
not be recalled.
C EFFECT button
Turn this button on to prevent recall (recall safe) of the
effect settings. The button will appear inverted when
on.
D CHANNEL field
Selects the recall safe channels. The mix parameters of
selected channels will not be recalled.
The CHANNEL field buttons correspond to the fol-
lowing channels.
• INPUT......................... Input channels 1–16
• EFFECT RETURN ..... Effect Return channels 1–4
• TRACK ....................... Track channels 1–24
• BUS............................ Bus master 1, 2
• AUX ............................ AUX send master 1–4
• EFFECT SEND .......... Effect send master 1–4
• STEREO..................... Stereo output channel
HINT
• All CHANNEL field buttons can be cleared (de-selected) by
pressing the [F2] key while holding the Display section
[SHIFT] key.
2
Select the parameter(s) or channel(s) that
you want to set to Recall Safe, and activate
the corresponding button(s).
3
Move the cursor to the RCL.SAFE button
and press the [ENTER] key.
Recall Safe has now been enabled. The selected
parameter(s) and/or channel(s) will not be affected by
scene recall operations until you change this setting.
HINT
• The RCL Safe page settings are shared by all songs.