Display Message List - Yamaha AW2400 Owner's Manual

■ Messages
A/B POINTS NOT FOUND
AUTOMIX ABORTED!
AUTOMIX DISABLED!
AUTOMIX MEMORY FULL!
AUTOMIX RUNNING!
CANNOT DEFEAT MUTE
CANNOT REDO
CANNOT SET MARK
CANNOT UNDO
CD PLAY MODE NOW
CH. PARAMETER INITIALIZED
DIFFERENT TC FRAME TYPE
DIGITAL-ST-IN REC PROHIBIT.
DISK BUSY!!
DISK FULL!!
IN/OUT POINTS NOT FOUND
IN/OUT POINTS REVERSE ORDER
IN/OUT POINTS TOO CLOSE
LOCATE POINT ERASED
LOCATE POINT SET
MARK POINT ERASED
MARK POINT SET
MIDI IN: DATA FRAMING ERROR!
MIDI IN: DATA OVERRUN!
MIDI: RX BUFFER FULL!
MIDI: TX BUFFER FULL!
MTC SLAVE MODE NOW
NO DATA TO COPY!
NO MARK LEFT
NOTHING TO UNDO!
RECORD TRACK NOT SELECTED
RECORDER BUSY!
RECORDER RUNNING NOW
REDO COMPLETED
REPEAT POINTS TOO CLOSE
SELECTED CH IS NONE.
SET OVERWRITE!
SOUND CLIP MODE NOW
STEREO TRACK PLAYBACK MODE

Display message list

Repeat Playback cannot be performed because A/B points are not specified.
Automix recording has been aborted.
Automix is currently disabled. Please set to ENABLE.
Not enough memory available for automix.
That operation cannot be performed while automix is running.
Mute cannot be disengaged because the simultaneous playback limit will be
exceedced.
Redo (re-execution of an operation) is not possible.
It is not possible to specify a marker at an already-specified position.
Undo (cancellation of an operation) is not possible.
Since the AW2400 is in CD Play mode, this operation cannot be executed.
The mixer parameters of the channel have been initialized.
MTC of a different frame type than the internal setting is being received.
Recording of digital input signals is prohibited.
The reading speed of the internal hard disk is not fast enough, or the reading
speed has slowed down because the recorded data has become fragmented.
There is insufficient space on the internal hard disk.
Auto-punch recording cannot be performed because in/out points are not speci-
fied.
In/out points are set in wrong order.
The auto punch-in/out interval is too short. It cannot be set less than approxi-
mately 100 msec.
The locate point has been erased.
The locate point has been set.
The marker has been erased.
The marker has been set.
Invalid MIDI data may have been received.
Invalid MIDI data may have been received.
Receiving more MIDI data than it can handle.
Attempting to transmit more MIDI data than it can handle.
Since the AW2400 is in MTC Slave mode, this operation cannot be executed.
There is no data to be copied.
The allowable number of marks has been exceeded.
Not data available for undo.
Recording cannot be performed because you have not selected a record track.
The operation cannot be executed because the recorder is operating.
Since the recorder is recording or playing, this operation cannot be executed.
Redo (re-execution of the previous operation) has been completed.
The repeat interval is too short. It cannot be set to less than one second.
The selected channel is not available.
Please specify the automix parameters to be overwritten in the OVERWRITE
field.
Since the AW2400 is in Sound Clip mode, this operation cannot be executed.
Since the AW2400 is in Stereo Track Playback mode, this operation cannot be
executed.
Display message list
AW2400 Owner's Manual
263