Accessing A Screen/Page; Switching A Button On/Off; Editing A Value In The Display; Using Additional Function Buttons - Yamaha AW2400 Owner's Manual

Accessing a screen/page

When you want to edit an internal setting of the AW2400,
or to edit a parameter that cannot be operated by a fader or
knob on the top panel, you will need to access the desired
screen and page.
1
Press the key or knob for the desired
screen.
The keys and knobs of various sections listed below
have their own screens, and the corresponding screen
will be displayed when you press a key or knob.
• All keys in the Work Navigate section
• All keys in the Quick Navigate section
• The [METER] key in the Display section
• The [VIEW]/[DYN]/[AUX]/[EFFET]/[PAN/EQ] keys of
the Selected Channel section
• All knobs of the Selected Channel section
• All keys of the Scene/Automix/USB section
• The [REMOTE] key of the Layer section
• The [SOUND CLIP] key of the Locate section
HINT
• Press a SELECTED CHANNEL knob after pressing the
SELECTED CHANNEL [DYN], [AUX], [EFFECT, or [PAN/EQ]
key to access the related display screen.
• When you switch screens, the page that was last used in that
screen will be displayed.
2
Use the [F1]–[F4] keys to select different
pages within a screen.
The [F1]–[F4] keys correspond to the tabs as follows.
[F1] key [F2] key
HINT
• You can access the pages in sequence by repeatedly press-
ing the key referred to in step 1, above.

Switching a button on/off

Here's how to switch a button in the screen on/off.
1
2

Editing a value in the display

Here's how to edit the value of a knob or parameter shown
in the display.
1
2

Using Additional Function Buttons

When an
display the tabs shown along the bottom of the display can
be switched to provide additional functions.
[F3] key [F4] key
1
2
Basic operation of the AW2400
Use the [CURSOR] keys to
move the cursor to the
desired button in the screen.
Press the [ENTER] key.
The button will be switched on/off.
If you move the cursor to a button
that executes a specific function and
then press the [ENTER] key, that
function will be executed.
Use the [CURSOR] keys to
move the cursor to the
desired knob or parameter
value.
Turn the [DATA/JOG] dial or
press the [INC]/[DEC] keys to
edit the value.
mark appears in the lower left corner of the
Press the [SHIFT] key when any screen with
an mark in the lower left corner is
showing.
The additional function buttons will appear in place of
the tabs along the bottom of the display while the
[SHIFT] key is held.
Additional Function Buttons
While holding the [SHIFT] key press the
[F1]–[F4] button to execute the correspond-
ing function.
AW2400 Owner's Manual
2
31