Mute Group Assignments - Yamaha AW2400 Owner's Manual

Mute Group assignments

Mute Grouping is a function that links the [ON] key oper-
ations of multiple channels. This lets you mute multiple
instruments by pressing a single [ON] key, or press a sin-
gle key to alternate the on/off status of multiple track
channels.
1
Call the MONITOR screen Mute Grp. page
by either pressing the Quick Navigate sec-
tion [MONITOR] key as many times as nec-
essary, or by pressing the [F3] key after
pressing the [MONITOR] key.
This page contains the following items.
A
1 ENABLE field
Use these buttons to switch mute groups E–H on/off,
or to select the mute group that you want to operate.
The E–H buttons will be highlighted to indicate mute
groups that are turned on.
B INPUT field
C TRACK field
These areas indicate the mute group to which each
input channel 1–16 and track channel 1–24 is
assigned. The "●" symbol indicates channels that are
assigned, and the "..." symbol indicates channels that
are not assigned.
2
In the ENABLE field, move the cursor to the
button E–H of the mute group that you want
to operate.
B C
Convenient functions for mixdown/bounce
3
Use the Layer section keys, the [INPUT
SEL] keys, and the [SEL] keys to select the
channels that you want to assign to this
mute group.
The assignment to the mute group will alternately be
switched on or off each time you press the [INPUT
SEL] key or [SEL] key.
HINT
• If you want to defeat all assignments for the mute group you're
currently operating, hold down the Display section [SHIFT]
key and press the [F1] key.
• If you want to defeat all assignments in the Mute Grp. page,
hold down the [Display section [SHIFT] key and press the [F2]
key.
4
Repeat steps 2–3 to make assignments for
other mute groups.
NOTE
• You can't assign a single channel to more than one mute
group.
5
To enable a mute group, move the cursor to
the E–H buttons and press the [ENTER] key.
Buttons E–H can be turned on/off independently.
6
Operate a channel that is assigned to a
mute group.
The [ON] keys of all channels assigned to that mute
group will operate simultaneously.
HINT
• If you make mute group assignments while the [ON] keys of
the assigned channels are in a mixed state (some on, some
off), the on/off setting of each channel will alternate.
• The mute group assignments in the Mute Grp. page can be
copied to the Fader Grp. page by holding down the Display
section [SHIFT] key and pressing the [F4] key.
AW2400 Owner's Manual
8
83