Transport/Locate Operation; The Transport Section Keys; Move To A Specified Location - Yamaha AW2400 Owner's Manual

Transport/Locate Operation

This chapter covers transport key operation, use of the locate/marker functions, and a range of
other playback features.
The functions of the Transport section keys change according to the current state of the recorder
(playback, stopped, etc.), as listed in the chart below.
Key
Playing
PLAY[ ] key —
STOP[■] key Stop
REW[ ] key Rewind
FF[ ] key Fast forward
RTZ[ ] key Return to zero and play
Press simultaneously
with PLAY [ ] key to
REC[●] key
begin recording (Punch
In)
The REC [●] key has no effect if no tracks are set to the record standby mode.
The AW2400 allows you to move directly to any location in a song by numerically specifying the
desired locate point.
1
With the recorder stopped, press the
Locate/Number section [NUM.LOCK] key so
that its indicator lights.
A popup window will appear into which you can enter
the destination locate point.
Chapter 9

The Transport Section Keys

Recorder Status
Stopped
Play
—
Rewind speed
Rewind
Fast forward
Return to zero and play
or stop (depending on
Return to zero and stop
Play/Stop status prior to
rewind)
Press simultaneously
with PLAY [ ] key to
begin recording
Move To a Specified Location
Rewinding Fast Forwarding
Play Play
Stop Stop
Rewind
(8x ↔ 16x)
Fast forward speed
Fast forward
(8x ↔ 16x)
Return to zero and play
or stop (depending on
Play/Stop status prior to
fast forward)
— —
2
Enter the locate point in measures/beats.
You can use either of the following two methods to
enter the locate point.
● Use the [DATA/JOG] dial or [INC]/[DEC]
keys
Move the cursor to the measure or beat field, and use
the [DATA/JOG] dial or [INC]/[DEC] keys to set as
required.
Recording
Stop record and play
(Punch Out)
Stop
—
—
—
—
AW2400 Owner's Manual
9
87