Gilson VERITY 1910 MS User Manual page 85

Trigger from a Passive Source
To and From
External
Instrument
Volt-free contact
Volt-free contact
External
Instrument
Volt-Free
contact
Figure 43
Sample Wiring for a Passive Source
If attaching the VERITY 1910 MS Detector to a passive trigger source the user must ensure
NOTICE
the external instrument is rated for the output from the VERITY 1910 MS Detector. Gilson is
not responsible for any damage to external instrumentation.
connect to VERITY 1910
comments
MS Detector Aux I/o Pin Number
First side of volt-free
1
contact
Second side of volt-
3
free contact
To External Instrument
From External Instrument
Pin 1
MS Detector
AUx I/o Port
Pin 3
VERITY® 1910 MS DETEcToR
Signal Name
Isolated 5V supply
First input trigger
| USER'S GUIDE
85